Programming software provides easy to use instructions. With 40pin ZIF programming of the seat, can be directly programmed in 8-pin to 40 pin PIC microcontroller chip can be programmed Using ICSP online or add conversion blocks.Ĩ pin 40 pin-board outside the chip can be downloaded directly online ICSP output.Ĭompatible with Windows98 and Windows2000/NT, Windows XP / Windows 7 and other operating systems. PICSTARTPLUS much faster rate than programming.Ĭan easily read the contents of the chip program area.Ĭomprehensive information prompts, allowing users to understand the working state. No external power supply, communication and power is only a USB cable to print complete, without any cable. This option works OK on older operating systems such as Windows XP.Support the most popular programming PIC chips, read, encryption and other features! This is due to an issue between the Prolific USB to Serial drivers and the Microbrn software on Windows 7. Please note that on Windows 7, the 'Reset Programmer' option on the 'Programmer' menu may not function correctly. The programming software should now reset your programmer and you are ready to go! Enter the value you noted down earlier and click OK.

Click on the 'File' menu, and choose 'Port'.

Click on the 'File' menu, and choose 'Programmer'.

It will usually fail to reset the programmer the first time it is started - the correct Serial port has not yet been selected.

Run the 'microbrn.exe' file in the 'PIC Programmer Software' folder.

There will be some text in brackets - such as 'COM3'. There should be an item labelled 'Prolific USB-to-Serial Comm Port'.

Click the + next to 'Ports (COM & LPT)'.

Click on the 'Hardware' tab, and then click on 'Device Manager'.

Go to Start, and right click on 'Computer'.

Run the 'PL2303_Prolific_DriverInstaller_v1.7.0.exe' program in the 'PIC Programmer Drivers' folder to install the driver.

Pin 1 on the ZIF socket is located next to the locking lever. When putting a PIC in the ZIF (Zero Insertion Force) socket, the PIC Programming software will indicate how it should be positioned. The PIC programmer drivers and software are available to download: Download

Getting started with your K150 PIC Programmer K150 USB PIC Programmer

Pic programmer k150 windows 10